How To Install Roller Blinds

Installation Guide PDF
Roller Blinds Installation Guide
📄 Click here to view or download the Roller Blinds Installation Guide
BEFORE YOU BEGIN

Check your ‘Measure’ sheet to determine the configuration of the blind

You need to determine what type of surface you are mounting your bracket to. Predrill using the brackets as a guide. Ensure you use appropriate plugs and masonry tools if mounting into brick or stone.

SURFACE TYPE GUIDE
TIMBER
We recommend predrilling holes and using 20-25mm button head screws
PLASTER
We recommend a wall anchor.
STONE, CONCRETE, BRICK, TILE
Use a masonry drill with appropriate screws, anchors and plugs
CONFIGURATION TYPES
ROLL TYPE
OVER ROLL
UNDER ROLL
FIT TYPE
RECESS FIT
FACE FIT
MOUNT THE BRACKETS

First, secure brackets with one screw only. Once satisfied with the position, proceed to secure brackets in place using the second screw.

INSTALL THE BLIND
STEP 1
Pin end in first
Put the pin end in first.
STEP 2
Align two hooks
While maintaining slight tension on the pin end side, lift the clutch end side and align the two hooks with the two vertical slots on the bracket.
STEP 3
Blind in place
The blind should lower into place.

Pin end in Align two hooks Blind in place

INSTALL THE SAFETY CLIP

A child safety clip must be installed if the chain sits lower than 1.6 metres from the floor.

Fit the chain into the loop of the clip. Pull the clip down until it is as tight as possible without placing tension on the chain. Screw into place.

WARNING

WARNING: Young children have died by wrapping loose curtain and blind cords or chains around their necks. Secure cords or chains with cord guides or keep them out of reach by winding them around a cleat. Move cots and furniture away from window covering cords or chains.

Do not remove this label.

We here at Onlineblinds4u take the safety of our kids very seriously.

WWW.ONLINEBLINDS4U.COM.AU