Luna Motorisation Installation Guide
LUNA ROLLER BLIND MOTOR PROGRAMMING SHEET
| Function | Button Combination | Action |
|---|---|---|
| Pair Remote | Hold PROG until green, choose channel, hold UP + DOWN | Remote paired |
| Enter Config Mode | Hold P1 + P3 | Motor enters programming mode |
| Set Bottom Limit | Move blind to bottom, hold P3 + P2 | Bottom limit saved |
| Set Top Limit | Move blind to top, hold P1 + P2 | Top limit saved |
| Exit Config Mode | Hold STOP | Programming complete |
| Reverse Direction | Hold P1 + P3 for 6 seconds, then hold UP + DOWN | Motor direction reversed |
| Wake From Sleep | Hold PROG until green blinks twice | Motor active |
| Deep Sleep Mode | Hold PROG until amber blinks twice | Motor goes to sleep |
LUNA CURTAIN MOTOR PROGRAMMING SHEET
| Function | Button Combination | Action |
|---|---|---|
| Pair Remote | Hold PROG until solid green, choose channel, hold UP + DOWN | Remote paired |
| Enter Limit Setting | Hold Side Switch L + R | Motor jogs |
| Open Curtain | Tap open side switch | Curtain opens |
| Close Curtain | Tap close side switch | Curtain closes |
| Reverse Direction | Hold P1 + P3 for 6 seconds, then hold UP + DOWN | Direction reversed |
| Wake From Sleep | Hold PROG until green blinks twice | Motor active |
| Deep Sleep Mode | Hold PROG until red/amber blinks twice | Motor sleeps |
WWW.ONLINEBLINDS4U.COM.AU