How to Measure Roller Blinds – Measurement Guide
Roller Blinds Measurement Guide
Configuration: Before You Begin
A key step before you start measuring is deciding whether you would like your blinds inside the window frames (known as Recess Fit) or outside (known as Face Fit).
Recess Fit: Requires a minimum depth of 50mm, with 70mm recommended.
Roll Type
Under Roll
Less light leakage & more privacy
Blind roll and backing is visible
Recommended for face fit
Over Roll
Clears obstructions
Covers tubing
Measure – Face Fit
Measuring the Width
Measure the exact outside width of the architrave in three positions – top, middle, and bottom. Take the largest measurement.
If the window has no architraves, add 50mm on each side.
Measuring the Drop
Measure the exact outside height of the architrave in three positions – left, middle, and right. Take the largest measurement.
If the window has no architraves, add 80mm.
Tick if Face Fit
Measure – Recess Fit
Measuring the Depth
Before selecting recess fit, make sure you have a minimum of 50mm in depth. 70mm is recommended.
Measuring the Width
Measure the exact inside width in three positions – top, middle, and bottom. Do not make deductions. Take the smallest measurement.
Measuring the Drop
Measure the exact inside height from the top to the windowsill in three positions – left, middle, and right. Take the smallest measurement.
Tick if Recess Fit
Measurement Summary
Face Fit: Record width and drop from outer architrave edges.
Recess Fit: Record smallest internal width and drop dimensions.
For any questions, contact us at contact@onlineblinds4u.com.au or visit www.onlineblinds4u.com.au