How to Measure Double Vision (Zebra Blinds) – Measurement Guide
CONFIGURATION
BEFORE YOU BEGIN
A key step before you start measuring double vision/zebra blind is whether you would like your blinds inside the window frames (known as recess fit) or outside (known as face fit). Recess fit needs a minimum 50mm depth required.
MEASURE - FACE FIT
MEASURING THE WIDTH
- Measure the exact outside width of the architrave in three different positions- the top, middle and bottom.
- Take the smallest measurement.
- If the window has no architraves add 40-60 MM each side for width.
MEASURING THE DROP
- Measure the exact outside height of the architrave in three different positions- the left, middle and right.
- Take the largest measurement.
- If the window has no architraves add 80-100 MM on height.
MEASURE - RECESS FIT
MEASURING THE DEPTH
- Before selecting recess fit, make sure you have a minimum of 50mm in depth.
MEASURING THE WIDTH
- Measure the exact inside width in three different positions - the top, middle & bottom (do not make deductions).
- Take the smallest measurement.
MEASURING THE DROP
- Measure the exact inside recess height from the top to the bottom of the windowsill in three positions - the left, middle, & right.
- Take the smallest measurement.
TAKE YOUR MEASUREMENTS
READ THE INSTRUCTIONS BEFORE MEASURING
- WIDTH
- DROP
WWW.ONLINEBLINDS4U.COM.AU